Klockner Moeller Electric Parts from KlocknerMoeller.net
|
 |
Call Toll Free!
1-877-595-9616

|
|
Largest Authorized Stocking USA Distributor
Representing

|
| |
Electronic motor starters and drives General |
| |
| The Complete Power Supply and Control Program for Motors |
| |
As the applications differ, so do the requirements made of the electric drives: - In the simplest case, the motor is switched with an
electromechanical contactor. Combinations consisting of motor protection and line protection are termed motor starter.
- If frequent and/or silent switching is required, contactless semiconductor contactors are used. In addition to conventional line,
short-circuit and overload protection, superfast semiconductor fuses are required for type “2” coordination and may be needed for type
“1” coordination.
- During DOL starting (star-delta, reversing starter or pole-switching), unwanted current and torque peaks occur. Soft
starters eliminate these to ensure gentle starting and prevent an excessive burden on the power source.
- Where an infinitely adjustable speed or a torque adjustment is
necessary, frequency inverters (U/f inverters, vector frequency inverters, servo) are used today.
As a general rule, the application determines the drive. |
 |
| |
| |
|