| |
Automation Systems
Modular I/O System XI/ON |
| |
| Flexibility |
Each XI/ON station can be adapted exactly for the
required number of channels since the modules are available in different
levels of granularity.
For example, digital input modules with 2, 4, 16 or 32 channels are
available in slice or block design.
A XI/ON station can contain modules in any combination. This enables the
system to be adapted to virtually any application in industrial
automation.
|
Compact design
The narrow mounting width of the XI/ON modules (gateway 50.4 mm;
slice 12.6 mm, block 100.8 mm) and the low mounting height make the
system ideal for use in applications where space is at a premium. |
| |
Simple handling
Apart from the gateway, all XI/ON modules consist of a base module and
an electronics module.
The gateway and the base modules can be snap-fitted on mounting rails.
The electronics modules can then be plugged simply onto the assigned
base module.
The base modules are available as terminal blocks. They are wired either
with spring-loaded or screw terminals. The electronic modules can be
fitted or removed during commissioning or for maintenance without
disturbing the wiring.
A design coding feature ensures that the electronic modules can only be
fitted at the correct locations provided.
|
| |
I/Oassistant diagnostics and engineering software
The I/Oassistant provides support during the entire planning and
implementation phase of an I/O system. It provides help for engineering
the stations, the configuration and for setting the parameters. The
software is used for commissioning systems and carrying out tests and
diagnostics on the stations.
The entire documentation for the station, including a parts list for
ordering, can be generated after the engineering phase.
|
 |
