Klockner Moeller Electric Parts from KlocknerMoeller.net

Klockner Moeller Electric Parts Experts

Call Toll Free!  

1-877-595-9616

Moeller Electric Live Chat

Largest Authorized Stocking USA Distributor  Representing

Moeller Electric LOGO --- Formally Klockner Moeller German Made Quality Available from US owned company! 1-866-595-9616

 
Electronic motor starters and drives
Connection examples, DM4
Enable/immediate stop without ramp function (e.g. for Emergency-Stop)
The digital input E2 is programmed in the factory so that it has the "Enable" function. The soft starter is enabled only when a High signal is applied to the terminal. The soft starter cannot be operated without enabling signal.

In the event of wire breakage or interruption of the signal by an Emergency-Stop circuit, the regulator in the soft starter is immediately blocked and the power circuit disconnected, and after that the "Run“ relay drops out.

Normally the drive is always stopped via a ramp function. When the operating conditions require an immediate de-energization, this is effected via the enabling signal.
Caution!
You must in all operating conditions always first stop the soft starter ("Run“ relay scanning), before you mechanically interrupt the power conductors. Otherwise a flowing current is interrupted – thus resulting in voltage peaks, which in rare cases may destroy the thyristors of the soft starter.

Connection Example
 



 

Hit Counter